안녕하세요.


ASUS 공유기에 해당 기능이 들어있는 것으로 알고 있습니다.


혹시나 U5를 사용하시어 사용하신다면 아래와 같이 사용해 주시면 되겠습니다.


설치 방법에 대한 질문만 받고 그 이외의 응답은 없습니다.


참고하시길 바랍니다.




1. udpxy 설치하기


# 소스 받기

root@AOL-Debian:~# wget http://downloads.sourceforge.net/project/udpxy/udpxy/Chipmunk-1.0/udpxy.1.0.23-0-prod.tar.gz

--2018-08-07 16:52:50--  http://downloads.sourceforge.net/project/udpxy/udpxy/Chipmunk-1.0/udpxy.1.0.23-0-prod.tar.gz

Resolving downloads.sourceforge.net (downloads.sourceforge.net)... 216.105.38.13

Connecting to downloads.sourceforge.net (downloads.sourceforge.net)|216.105.38.13|:80... connected.

HTTP request sent, awaiting response... 302 Found

Location: https://jaist.dl.sourceforge.net/project/udpxy/udpxy/Chipmunk-1.0/udpxy.1.0.23-0-prod.tar.gz [following]

--2018-08-07 16:52:50--  https://jaist.dl.sourceforge.net/project/udpxy/udpxy/Chipmunk-1.0/udpxy.1.0.23-0-prod.tar.gz

Resolving jaist.dl.sourceforge.net (jaist.dl.sourceforge.net)... 150.65.7.130, 2001:df0:2ed:feed::feed

Connecting to jaist.dl.sourceforge.net (jaist.dl.sourceforge.net)|150.65.7.130|:443... connected.

HTTP request sent, awaiting response... 200 OK

Length: 79133 (77K) [application/x-gzip]

Saving to: ‘udpxy.1.0.23-0-prod.tar.gz’


udpxy.1.0.23-0-prod.tar.gz 100%[========================================>]  77.28K  --.-KB/s   in 0.07s  


2018-08-07 16:52:51 (1.01 MB/s) - ‘udpxy.1.0.23-0-prod.tar.gz’ saved [79133/79133]


# 소스 압축풀기

root@AOL-Debian:~# tar xf udpxy.1.0.23-0-prod.tar.gz 


# 소스 압축 푼 디렉터리로 이동

root@AOL-Debian:~# cd udpxy-1.0.23-0/


컴파일 명령 내리기

root@AOL-Debian:~/udpxy-1.0.23-0# make

-bash: make: command not found


# build-essential 패키지 설치하기

root@AOL-Debian:~/udpxy-1.0.23-0# apt-get install build-essential

Reading package lists... Done

Building dependency tree       

Reading state information... Done

The following extra packages will be installed:

  binutils cpp cpp-4.9 dpkg-dev fakeroot g++ g++-4.9 gcc gcc-4.9 libalgorithm-diff-perl

  libalgorithm-diff-xs-perl libalgorithm-merge-perl libasan1 libatomic1 libc-dev-bin libc6-dev

  libcloog-isl4 libdpkg-perl libfakeroot libfile-fcntllock-perl libgcc-4.9-dev libisl10 libmpc3 libmpfr4

  libstdc++-4.9-dev libtimedate-perl libubsan0 linux-libc-dev make manpages-dev patch xz-utils

Suggested packages:

  binutils-doc cpp-doc gcc-4.9-locales debian-keyring gcc-4.9-doc libstdc++6-4.9-dbg gcc-multilib

  autoconf automake libtool flex bison gdb gcc-doc libgcc1-dbg libgomp1-dbg libitm1-dbg libatomic1-dbg

  libasan1-dbg liblsan0-dbg libtsan0-dbg libubsan0-dbg libcilkrts5-dbg libquadmath-dbg glibc-doc

  libstdc++-4.9-doc make-doc ed diffutils-doc

The following NEW packages will be installed:

  binutils build-essential cpp cpp-4.9 dpkg-dev fakeroot g++ g++-4.9 gcc gcc-4.9 libalgorithm-diff-perl

  libalgorithm-diff-xs-perl libalgorithm-merge-perl libasan1 libatomic1 libc-dev-bin libc6-dev

  libcloog-isl4 libdpkg-perl libfakeroot libfile-fcntllock-perl libgcc-4.9-dev libisl10 libmpc3 libmpfr4

  libstdc++-4.9-dev libtimedate-perl libubsan0 linux-libc-dev make manpages-dev patch xz-utils

0 upgraded, 33 newly installed, 0 to remove and 4 not upgraded.

Need to get 35.2 MB of archives.

After this operation, 96.7 MB of additional disk space will be used.

Do you want to continue? [Y/n] 

Get:1 http://httpredir.debian.org/debian/ jessie/main libasan1 armhf 4.9.2-10+deb8u1 [168 kB]

Get:2 http://httpredir.debian.org/debian/ jessie/main libatomic1 armhf 4.9.2-10+deb8u1 [6,068 B]

Get:3 http://httpredir.debian.org/debian/ jessie/main libisl10 armhf 0.12.2-2 [338 kB]

Get:4 http://httpredir.debian.org/debian/ jessie/main libcloog-isl4 armhf 0.18.2-1+b2 [50.8 kB]

Get:5 http://httpredir.debian.org/debian/ jessie/main libmpfr4 armhf 3.1.2-2 [508 kB]

Get:6 http://httpredir.debian.org/debian/ jessie/main libubsan0 armhf 4.9.2-10+deb8u1 [69.5 kB]

Get:7 http://httpredir.debian.org/debian/ jessie/main libmpc3 armhf 1.0.2-1 [31.4 kB]

Get:8 http://httpredir.debian.org/debian/ jessie/main patch armhf 2.7.5-1+deb8u1 [101 kB]

Get:9 http://httpredir.debian.org/debian/ jessie/main xz-utils armhf 5.1.1alpha+20120614-2+b3 [218 kB]

Get:10 http://httpredir.debian.org/debian/ jessie/main binutils armhf 2.25-5+deb8u1 [3,537 kB]

Get:11 http://httpredir.debian.org/debian/ jessie/main libc-dev-bin armhf 2.19-18+deb8u10 [232 kB]

Get:12 http://httpredir.debian.org/debian/ jessie/main linux-libc-dev armhf 3.16.56-1+deb8u1 [1,077 kB]

Get:13 http://httpredir.debian.org/debian/ jessie/main libc6-dev armhf 2.19-18+deb8u10 [1,750 kB]

Get:14 http://httpredir.debian.org/debian/ jessie/main cpp-4.9 armhf 4.9.2-10+deb8u1 [4,220 kB]

Get:15 http://httpredir.debian.org/debian/ jessie/main cpp armhf 4:4.9.2-2 [17.4 kB]                     

Get:16 http://httpredir.debian.org/debian/ jessie/main libgcc-4.9-dev armhf 4.9.2-10+deb8u1 [358 kB]     

Get:17 http://httpredir.debian.org/debian/ jessie/main gcc-4.9 armhf 4.9.2-10+deb8u1 [4,421 kB]          

Get:18 http://httpredir.debian.org/debian/ jessie/main gcc armhf 4:4.9.2-2 [5,138 B]                     

Get:19 http://httpredir.debian.org/debian/ jessie/main libstdc++-4.9-dev armhf 4.9.2-10+deb8u1 [1,129 kB]

Get:20 http://httpredir.debian.org/debian/ jessie/main g++-4.9 armhf 4.9.2-10+deb8u1 [11.8 MB]           

Get:21 http://httpredir.debian.org/debian/ jessie/main g++ armhf 4:4.9.2-2 [1,510 B]                     

Get:22 http://httpredir.debian.org/debian/ jessie/main make armhf 4.0-8.1 [335 kB]                       

Get:23 http://httpredir.debian.org/debian/ jessie/main libtimedate-perl all 2.3000-2 [42.2 kB]           

Get:24 http://httpredir.debian.org/debian/ jessie/main libdpkg-perl all 1.17.27 [1,075 kB]               

Get:25 http://httpredir.debian.org/debian/ jessie/main dpkg-dev all 1.17.27 [1,548 kB]                   

Get:26 http://httpredir.debian.org/debian/ jessie/main build-essential armhf 11.7 [6,934 B]              

Get:27 http://httpredir.debian.org/debian/ jessie/main libfakeroot armhf 1.20.2-1 [40.5 kB]              

Get:28 http://httpredir.debian.org/debian/ jessie/main fakeroot armhf 1.20.2-1 [83.5 kB]                 

Get:29 http://httpredir.debian.org/debian/ jessie/main libalgorithm-diff-perl all 1.19.02-3 [51.7 kB]    

Get:30 http://httpredir.debian.org/debian/ jessie/main libalgorithm-diff-xs-perl armhf 0.04-3+b1 [11.9 kB]

Get:31 http://httpredir.debian.org/debian/ jessie/main libalgorithm-merge-perl all 0.08-2 [13.5 kB]      

Get:32 http://httpredir.debian.org/debian/ jessie/main libfile-fcntllock-perl armhf 0.22-1+b1 [36.1 kB]  

Get:33 http://httpredir.debian.org/debian/ jessie/main manpages-dev all 3.74-1 [1,865 kB]                

Fetched 35.2 MB in 12s (2,808 kB/s)                                                                      

Extracting templates from packages: 100%

Selecting previously unselected package libasan1:armhf.

(Reading database ... 24937 files and directories currently installed.)

Preparing to unpack .../libasan1_4.9.2-10+deb8u1_armhf.deb ...

Unpacking libasan1:armhf (4.9.2-10+deb8u1) ...

Selecting previously unselected package libatomic1:armhf.

Preparing to unpack .../libatomic1_4.9.2-10+deb8u1_armhf.deb ...

Unpacking libatomic1:armhf (4.9.2-10+deb8u1) ...

Selecting previously unselected package libisl10:armhf.

Preparing to unpack .../libisl10_0.12.2-2_armhf.deb ...

Unpacking libisl10:armhf (0.12.2-2) ...

Selecting previously unselected package libcloog-isl4:armhf.

Preparing to unpack .../libcloog-isl4_0.18.2-1+b2_armhf.deb ...

Unpacking libcloog-isl4:armhf (0.18.2-1+b2) ...

Selecting previously unselected package libmpfr4:armhf.

Preparing to unpack .../libmpfr4_3.1.2-2_armhf.deb ...

Unpacking libmpfr4:armhf (3.1.2-2) ...

Selecting previously unselected package libubsan0:armhf.

Preparing to unpack .../libubsan0_4.9.2-10+deb8u1_armhf.deb ...

Unpacking libubsan0:armhf (4.9.2-10+deb8u1) ...

Selecting previously unselected package libmpc3:armhf.

Preparing to unpack .../libmpc3_1.0.2-1_armhf.deb ...

Unpacking libmpc3:armhf (1.0.2-1) ...

Selecting previously unselected package patch.

Preparing to unpack .../patch_2.7.5-1+deb8u1_armhf.deb ...

Unpacking patch (2.7.5-1+deb8u1) ...

Selecting previously unselected package xz-utils.

Preparing to unpack .../xz-utils_5.1.1alpha+20120614-2+b3_armhf.deb ...

Unpacking xz-utils (5.1.1alpha+20120614-2+b3) ...

Selecting previously unselected package binutils.

Preparing to unpack .../binutils_2.25-5+deb8u1_armhf.deb ...

Unpacking binutils (2.25-5+deb8u1) ...

Selecting previously unselected package libc-dev-bin.

Preparing to unpack .../libc-dev-bin_2.19-18+deb8u10_armhf.deb ...

Unpacking libc-dev-bin (2.19-18+deb8u10) ...

Selecting previously unselected package linux-libc-dev:armhf.

Preparing to unpack .../linux-libc-dev_3.16.56-1+deb8u1_armhf.deb ...

Unpacking linux-libc-dev:armhf (3.16.56-1+deb8u1) ...

Selecting previously unselected package libc6-dev:armhf.

Preparing to unpack .../libc6-dev_2.19-18+deb8u10_armhf.deb ...

Unpacking libc6-dev:armhf (2.19-18+deb8u10) ...

Selecting previously unselected package cpp-4.9.

Preparing to unpack .../cpp-4.9_4.9.2-10+deb8u1_armhf.deb ...

Unpacking cpp-4.9 (4.9.2-10+deb8u1) ...

Selecting previously unselected package cpp.

Preparing to unpack .../cpp_4%3a4.9.2-2_armhf.deb ...

Unpacking cpp (4:4.9.2-2) ...

Selecting previously unselected package libgcc-4.9-dev:armhf.

Preparing to unpack .../libgcc-4.9-dev_4.9.2-10+deb8u1_armhf.deb ...

Unpacking libgcc-4.9-dev:armhf (4.9.2-10+deb8u1) ...

Selecting previously unselected package gcc-4.9.

Preparing to unpack .../gcc-4.9_4.9.2-10+deb8u1_armhf.deb ...

Unpacking gcc-4.9 (4.9.2-10+deb8u1) ...

Selecting previously unselected package gcc.

Preparing to unpack .../gcc_4%3a4.9.2-2_armhf.deb ...

Unpacking gcc (4:4.9.2-2) ...

Selecting previously unselected package libstdc++-4.9-dev:armhf.

Preparing to unpack .../libstdc++-4.9-dev_4.9.2-10+deb8u1_armhf.deb ...

Unpacking libstdc++-4.9-dev:armhf (4.9.2-10+deb8u1) ...

Selecting previously unselected package g++-4.9.

Preparing to unpack .../g++-4.9_4.9.2-10+deb8u1_armhf.deb ...

Unpacking g++-4.9 (4.9.2-10+deb8u1) ...

Selecting previously unselected package g++.

Preparing to unpack .../g++_4%3a4.9.2-2_armhf.deb ...

Unpacking g++ (4:4.9.2-2) ...

Selecting previously unselected package make.

Preparing to unpack .../make_4.0-8.1_armhf.deb ...

Unpacking make (4.0-8.1) ...

Selecting previously unselected package libtimedate-perl.

Preparing to unpack .../libtimedate-perl_2.3000-2_all.deb ...

Unpacking libtimedate-perl (2.3000-2) ...

Selecting previously unselected package libdpkg-perl.

Preparing to unpack .../libdpkg-perl_1.17.27_all.deb ...

Unpacking libdpkg-perl (1.17.27) ...

Selecting previously unselected package dpkg-dev.

Preparing to unpack .../dpkg-dev_1.17.27_all.deb ...

Unpacking dpkg-dev (1.17.27) ...

Selecting previously unselected package build-essential.

Preparing to unpack .../build-essential_11.7_armhf.deb ...

Unpacking build-essential (11.7) ...

Selecting previously unselected package libfakeroot:armhf.

Preparing to unpack .../libfakeroot_1.20.2-1_armhf.deb ...

Unpacking libfakeroot:armhf (1.20.2-1) ...

Selecting previously unselected package fakeroot.

Preparing to unpack .../fakeroot_1.20.2-1_armhf.deb ...

Unpacking fakeroot (1.20.2-1) ...

Selecting previously unselected package libalgorithm-diff-perl.

Preparing to unpack .../libalgorithm-diff-perl_1.19.02-3_all.deb ...

Unpacking libalgorithm-diff-perl (1.19.02-3) ...

Selecting previously unselected package libalgorithm-diff-xs-perl.

Preparing to unpack .../libalgorithm-diff-xs-perl_0.04-3+b1_armhf.deb ...

Unpacking libalgorithm-diff-xs-perl (0.04-3+b1) ...

Selecting previously unselected package libalgorithm-merge-perl.

Preparing to unpack .../libalgorithm-merge-perl_0.08-2_all.deb ...

Unpacking libalgorithm-merge-perl (0.08-2) ...

Selecting previously unselected package libfile-fcntllock-perl.

Preparing to unpack .../libfile-fcntllock-perl_0.22-1+b1_armhf.deb ...

Unpacking libfile-fcntllock-perl (0.22-1+b1) ...

Selecting previously unselected package manpages-dev.

Preparing to unpack .../manpages-dev_3.74-1_all.deb ...

Unpacking manpages-dev (3.74-1) ...

Processing triggers for man-db (2.7.0.2-5) ...

Setting up libasan1:armhf (4.9.2-10+deb8u1) ...

Setting up libatomic1:armhf (4.9.2-10+deb8u1) ...

Setting up libisl10:armhf (0.12.2-2) ...

Setting up libcloog-isl4:armhf (0.18.2-1+b2) ...

Setting up libmpfr4:armhf (3.1.2-2) ...

Setting up libubsan0:armhf (4.9.2-10+deb8u1) ...

Setting up libmpc3:armhf (1.0.2-1) ...

Setting up patch (2.7.5-1+deb8u1) ...

Setting up xz-utils (5.1.1alpha+20120614-2+b3) ...

update-alternatives: using /usr/bin/xz to provide /usr/bin/lzma (lzma) in auto mode

Setting up binutils (2.25-5+deb8u1) ...

Setting up libc-dev-bin (2.19-18+deb8u10) ...

Setting up linux-libc-dev:armhf (3.16.56-1+deb8u1) ...

Setting up libc6-dev:armhf (2.19-18+deb8u10) ...

Setting up cpp-4.9 (4.9.2-10+deb8u1) ...

Setting up cpp (4:4.9.2-2) ...

Setting up libgcc-4.9-dev:armhf (4.9.2-10+deb8u1) ...

Setting up gcc-4.9 (4.9.2-10+deb8u1) ...

Setting up gcc (4:4.9.2-2) ...

Setting up libstdc++-4.9-dev:armhf (4.9.2-10+deb8u1) ...

Setting up g++-4.9 (4.9.2-10+deb8u1) ...

Setting up g++ (4:4.9.2-2) ...

update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode

Setting up make (4.0-8.1) ...

Setting up libtimedate-perl (2.3000-2) ...

Setting up libdpkg-perl (1.17.27) ...

Setting up dpkg-dev (1.17.27) ...

Setting up build-essential (11.7) ...

Setting up libfakeroot:armhf (1.20.2-1) ...

Setting up fakeroot (1.20.2-1) ...

update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode

Setting up libalgorithm-diff-perl (1.19.02-3) ...

Setting up libalgorithm-diff-xs-perl (0.04-3+b1) ...

Setting up libalgorithm-merge-perl (0.08-2) ...

Setting up libfile-fcntllock-perl (0.22-1+b1) ...

Setting up manpages-dev (3.74-1) ...

Processing triggers for libc-bin (2.19-18+deb8u10) ...


# 빌드하기

root@AOL-Debian:~/udpxy-1.0.23-0# make

cc -o util/mkdep util/mkdep.c

-rwxr-xr-x 1 root root 15108 Aug  7 16:58 util/mkdep

cc -W -Wall -Werror --pedantic -M udpxy.c sloop.c rparse.c util.c prbuf.c ifaddr.c ctx.c mkpg.c rtp.c uopt.c dpkt.c netop.c extrn.c main.c udpxrec.c > udpxy.dep

-e 

Making a [release] version (use 'debug' target as an alternative)


make[1]: Entering directory '/root/udpxy-1.0.23-0'

cc -W -Wall -Werror --pedantic  -DUDPXREC_MOD  -DNDEBUG -DTRACE_MODULE -c udpxy.c -o udpxy.o

cc -W -Wall -Werror --pedantic  -DUDPXREC_MOD  -DNDEBUG -DTRACE_MODULE -c sloop.c -o sloop.o

cc -W -Wall -Werror --pedantic  -DUDPXREC_MOD  -DNDEBUG -DTRACE_MODULE -c rparse.c -o rparse.o

cc -W -Wall -Werror --pedantic  -DUDPXREC_MOD  -DNDEBUG -DTRACE_MODULE -c util.c -o util.o

cc -W -Wall -Werror --pedantic  -DUDPXREC_MOD  -DNDEBUG -DTRACE_MODULE -c prbuf.c -o prbuf.o

cc -W -Wall -Werror --pedantic  -DUDPXREC_MOD  -DNDEBUG -DTRACE_MODULE -c ifaddr.c -o ifaddr.o

cc -W -Wall -Werror --pedantic  -DUDPXREC_MOD  -DNDEBUG -DTRACE_MODULE -c ctx.c -o ctx.o

cc -W -Wall -Werror --pedantic  -DUDPXREC_MOD  -DNDEBUG -DTRACE_MODULE -c mkpg.c -o mkpg.o

cc -W -Wall -Werror --pedantic  -DUDPXREC_MOD  -DNDEBUG -DTRACE_MODULE -c rtp.c -o rtp.o

cc -W -Wall -Werror --pedantic  -DUDPXREC_MOD  -DNDEBUG -DTRACE_MODULE -c uopt.c -o uopt.o

cc -W -Wall -Werror --pedantic  -DUDPXREC_MOD  -DNDEBUG -DTRACE_MODULE -c dpkt.c -o dpkt.o

cc -W -Wall -Werror --pedantic  -DUDPXREC_MOD  -DNDEBUG -DTRACE_MODULE -c netop.c -o netop.o

cc -W -Wall -Werror --pedantic  -DUDPXREC_MOD  -DNDEBUG -DTRACE_MODULE -c extrn.c -o extrn.o

cc -W -Wall -Werror --pedantic  -DUDPXREC_MOD  -DNDEBUG -DTRACE_MODULE -c main.c -o main.o

cc -W -Wall -Werror --pedantic  -DUDPXREC_MOD  -DNDEBUG -DTRACE_MODULE -c udpxrec.c -o udpxrec.o

cc -W -Wall -Werror --pedantic -DUDPXREC_MOD  -DNDEBUG -DTRACE_MODULE -o udpxy udpxy.o sloop.o rparse.o util.o prbuf.o ifaddr.o ctx.o mkpg.o rtp.o uopt.o dpkt.o netop.o extrn.o main.o udpxrec.o

-rwxr-xr-x 1 root root 90608 Aug  7 16:58 udpxy

ln -s udpxy udpxrec

make[1]: Leaving directory '/root/udpxy-1.0.23-0'


# 빌드된것 설치하기

root@AOL-Debian:~/udpxy-1.0.23-0# make install

lrwxrwxrwx 1 root staff    20 Aug  7 16:58 /usr/local/bin/udpxrec -> /usr/local/bin/udpxy

-rwxr-xr-x 1 root staff 90608 Aug  7 16:58 /usr/local/bin/udpxy

Installation of udpxy is complete

root@AOL-Debian:~/udpxy-1.0.23-0# 


설치가 끝났습니다.





2. 기본동작 시켜보기


root@AOL-Debian:~/udpxy-1.0.23-0# /usr/local/bin/udpxy -a eth0 -m eth0 -p 4022 -c 4


-a 는 신호를 내보낼 장치 -m 은 멀티캐스트를 받을 장치 -p 는 포트 설정 -c 는 동시 클라이언트 수를 의미합니다.


이렇게 설정하면 보안이 없는 상태로 구동이 되는 상태입니다.





3. 아이디 비번 걸기


아이디 비번은 아파치 서버 프록시기능으로 걸어볼 생각입니다.


# 아파치 웹서버를 설치합니다.

root@AOL-Debian:~# apt-get install apache2

Reading package lists... Done

Building dependency tree       

Reading state information... Done

apache2 is already the newest version.

0 upgraded, 0 newly installed, 0 to remove and 4 not upgraded.


# 프록시 관련 모듈을 활성화 합니다.
root@AOL-Debian:~# a2enmod proxy proxy_ajp proxy_http rewrite deflate headers proxy_balancer proxy_connect proxy_html
Enabling module proxy.
Considering dependency proxy for proxy_ajp:
Module proxy already enabled
Enabling module proxy_ajp.
Considering dependency proxy for proxy_http:
Module proxy already enabled
Enabling module proxy_http.
Enabling module rewrite.
Considering dependency filter for deflate:
Module filter already enabled
Module deflate already enabled
Enabling module headers.
Considering dependency proxy for proxy_balancer:
Module proxy already enabled
Considering dependency alias for proxy_balancer:
Module alias already enabled
Considering dependency slotmem_shm for proxy_balancer:
Enabling module slotmem_shm.
Enabling module proxy_balancer.
Considering dependency proxy for proxy_connect:
Module proxy already enabled
Enabling module proxy_connect.
Considering dependency proxy for proxy_html:
Module proxy already enabled
Enabling module proxy_html.
To activate the new configuration, you need to run:
  service apache2 restart

# 서버를 재시작 합니다.
root@AOL-Debian:~# service apache2 restart
[....] Restarting web server: apache2[Tue Aug 07 17:06:11.043416 2018] [proxy_html:notice] [pid 32210:tid 2927132672] AH01425: I18n support in mod_proxy_html requires mod_xml2enc. Without it, non-ASCII characters in proxied pages are likely to display incorrectly.
. ok 

# 에러 내용을 체크하여 활성화 해 봅니다. 그런데 모듈이 없네요. 그냥 넘어갑니다.
root@AOL-Debian:~# a2enmod mood_xml2enc
ERROR: Module mood_xml2enc does not exist!
root@AOL-Debian:~# 


설정 파일을 하나 생성합니다. 그리고 포트 설정을 맞춥니다.


root@AOL-Debian:~# nano /etc/apache2/sites-available/udpxy.conf 



<Virtualhost *:50000>

ProxyRequests Off


<Location />

        AuthType Basic

        AuthName "user only"

        AuthUserFile /etc/apache2/passwd

        Require valid-user

</Location>


<Proxy *>

Order Deny,allow

Allow from all

</Proxy>

ProxyPass / http://127.0.0.1:4022/

ProxyPassReverse / http://127.0.0.1:4022/

</Virtualhost>



# 50000 포트 리스닝 추가

root@AOL-Debian:~# nano /etc/apache2/ports.conf 


# If you just change the port or add more ports here, you will likely also

# have to change the VirtualHost statement in

# /etc/apache2/sites-enabled/000-default.conf


Listen 80

Listen 50000



<IfModule ssl_module>

        Listen 443

</IfModule>


<IfModule mod_gnutls.c>

        Listen 443

</IfModule>


# vim: syntax=apache ts=4 sw=4 sts=4 sr noet


# 계정 추가
root@AOL-Debian:~# htpasswd -c /etc/apache2/passwd djjproject
New password: 
Re-type new password: 
Adding password for user djjproject
root@AOL-Debian:~# 


# 사이트 활성 화 및 재시작
root@AOL-Debian:~# a2ensite udpxy.conf
Enabling site udpxy.
To activate the new configuration, you need to run:
  service apache2 reload
root@AOL-Debian:~# service apache2 restart
[....] Restarting web server: apache2[Tue Aug 07 17:12:56.895903 2018] [proxy_html:notice] [pid 1412:tid 2884395008] AH01425: I18n support in mod_proxy_html requires mod_xml2enc. Without it, non-ASCII characters in proxied pages are likely to display incorrectly.
. ok 
root@AOL-Debian:~# 


udpxy 를 lo 인터페이스에 물립니다.


lo 인터페이스에 물리면 외부에서 접근이 불가능해집니다. 오로지 127.0.0.1 을 통해서만 접근이 가능하게 됩니다.


# 돌고있는 udpxy 종료시키기

root@AOL-Debian:~# ps -ef | grep udpxy

root     31584     1  0 17:03 ?        00:00:00 /usr/local/bin/udpxy -a eth0 -m eth0 -p 4022 -c 4

root     32038 24097  0 17:05 pts/0    00:00:00 grep udpxy

root@AOL-Debian:~# kill 31584


root@AOL-Debian:~# /usr/local/bin/udpxy -a lo -m eth0 -p 4022 -c 4





4. 부팅시 udpxy 시작 스크립트 등록


root@AOL-Debian:~# nano /etc/rc.local


# udpxy

su root -c "/usr/local/bin/udpxy -a lo -m eth0 -p 4022 -c 4"





5. 사용해보기


http://id:pw@ipaddr:50000/rtp/ip:port

http://id:pw@ipaddr:50000/udp/ip:port


감사합니다.

Posted by ㅋㅋ잠자
Comments

티스토리 툴바